Quick paper airplane design

Wow, it's been ages since I last posted here! Anyway, here's a new paper airplane design. It's very quick and easy to make, but you start with a square paper rather than a rectangle one. Hope you enjoy it!

Ice Flying

No matter the weather Maxine, Pilot DS's Hobbyzone Outlaw, flew. And no hand launching either!

Stall To Nose Dive

Pilot DS flies a little too hot for a 2-channel Hobbyzone Outlaw and can not recover from his stall . . . smash!

Viva La Maxine!

Long live Maxine! Maxine was Pilot DS's Hobbyzone Outlaw, which has been discontinued by the manufacturer. This plane is a 2-channel plane that is perfect for the beginner pilot, who is unsure if s/he wants to committ to the hobby. This plane took a hell of a beating and kept performing time and time again. Sadly, after she was retired Pilot DS's depression set in and he has not flown the same since.

Learning 3-D



Hell's Eagle

This is my newest addition to my fleet. It is an Potensky EPP Eagle. This model came out in 2005; therefore it is an older model. I purchased it through Hobby-Lobby on clearance at $79 including 300 speed motor / 5:1 gear drive / ESC. Not a bad price. I put a Hitec Electron 6, two HS-50 & two HS-55 servos in it. It earned its name because it became a pain in the butt to get into the air. I learned a lot along the way, such as (1) never bench test at full throttle (2) be careful sanding EPP foam (3) it is better to burn a hole than drill through EPP -- to name a few. I killed my speed control before I ever got the bird in the air and replaced it with a 12 AMP ESC. The stock battery and compartment do not meet the CG; therefore I am going to have to create a new battery compartment. I cut foam out and moved battery as far forward as possible -- all the way to the wheel braces. It's not far enough forward. I did test fly it & with a tail heavy plane and a pilot that over sticks ailerons the plane rolled into the ground. The worst damage was the servo hing on the rudder broke off -- fixed in 5 minutes with epoxy -- simple. This is my first 4 channel plane I have owned. The next step is to meet with a local experienced pilot and reset the CG and go up with him using a "training cord." I use a Hitec Flash-5 radio and he owns a Hitec as well. This plan should yield best results without damaging plane. More posts to come...


Added poll

There isn't any update right now, but I have added a poll so you can vote for your favorite paper airplane out of the 4 that you can find in this site.

Unnusual paper airplane instructions

Here are the instructions for the unusual paper airplane.

Blog Archive